蜜臀国产在线视频-国产裸体美女永久免费无遮挡-国产乱人伦精品免费-亚洲人成在线7777-中年国产丰满熟女乱子正在播放

中文版

Your location: Home > News > Industry news
News

Company news Industry news
How to select and use electric valve device

The movement process of electric valve device can be controlled by the stroke, torque or axial thrust. It is an indispensable equipment to realize valve program control, automatic control and remote control. The operating characteristics and utilization rate of the electric valve device are determined by the working specifications of the valve type device and the position of the valve on the pipeline or equipment, which requires us to correctly select the electric valve device to prevent overload (the working torque is higher than the control torque). The following is a brief introduction to the basis for correct selection of electric valve devices, as well as some main parameters of electric valve devices.

1. Operating torque: the output torque of the electric device shall be 1.2~1.5 times of the maximum operating torque of the valve. The main engine structure for operating the thrust electric valve device can be divided into two types: no thrust disc and thrust disc. The electric valve device without thrust disc can output torque directly, while the electric valve device with thrust disc can output torque through the stem nut in the thrust disc< br /> 2. Number of rotation turns of output shaft: the number of rotation turns of the output shaft of the electric valve device is related to the nominal diameter of the valve, the screw pitch of the valve stem, and the number of screw heads, which should be calculated as M = H/ZS (M is the total number of rotation turns that the electric device should meet, H is the valve opening height, S is the screw pitch of the valve stem drive thread, and Z is the number of screw heads of the valve stem)< br /> 3. The influence of stem diameter on multi turn rising stem valves shall be considered. If the maximum valve stem diameter allowed by the electric device cannot pass through the valve stem of the matched valve, the electric valve cannot be assembled. Therefore, the inner diameter of the hollow output shaft of the electric device must be greater than the outer diameter of the stem of the rising stem valve. For non rising stem valves in partial turn valves and multi turn valves, although the passage of the valve stem diameter is not considered, the valve stem diameter and the size of the keyway should also be fully considered when selecting, so that they can work normally after assembly.

4. Opening and closing speed: if the opening and closing speed of the output speed valve is too fast, water hammer is likely to occur. At this time, appropriate opening and closing speed should be selected according to different use conditions.

© Zhejiang Zhongya Automation Technology Co., Ltd   浙ICP備08108511號-1
主站蜘蛛池模板: 崇仁县| 建湖县| 手机| 唐河县| 泊头市| 石嘴山市| 阳江市| 阳春市| 浠水县| 英德市| 云和县| 博湖县| 二连浩特市| 南汇区| 镇远县| 海口市| 陈巴尔虎旗| 砚山县| 金门县| 合肥市| 延寿县| 烟台市| 墨江| 武清区| 周宁县| 淳安县| 昌平区| 新丰县| 平阳县| 宜君县| 曲麻莱县| 大理市| 天水市| 巧家县| 松原市| 东丽区| 长岛县| 阿克陶县| 枣庄市| 惠来县| 抚顺市|